PhysicsHelp.co.uk

Oscilloscope practice

Read voltage amplitude, peak-to-peak voltage, period, frequency and phase difference.

Practise

Choose the time-base

Trace A has a known period of 0.4 ms and spans 2 horizontal divisions per cycle. Calculate the required time-base in ms/div. Give your answer to 3 significant figures.

Ideal sinusoidal voltage traces; one large square is one division. A is solid and B, when present, is dashed. Both channels have the same sensitivity and time-base.

Trace A has amplitude 2.5 divisions and period 2 divisions. Vertical sensitivity 0.2 V/div; time-base 0.2 ms/div.A solid0.2 V/div · 0.2 ms/div0 V
One large square is one division; the middle horizontal line is 0 V.
Diagram text alternative

Trace A has amplitude 2.5 divisions and period 2 divisions. Vertical sensitivity 0.2 V/div; time-base 0.2 ms/div.

Larger diagram
Trace A has amplitude 2.5 divisions and period 2 divisions. Vertical sensitivity 0.2 V/div; time-base 0.2 ms/div.A solid0.2 V/div · 0.2 ms/div0 V

Treat the given values as exact unless an uncertainty is stated.

Use decimals or e notation, e.g. 4.2e-3. Enter the unit separately.

Hint

Divide the known period by its horizontal span.

Worked solution
  1. Time-base = 0.4 / 2 = 0.2 ms/div.
  2. Answer: 0.200 ms/div (3 significant figures).
Another question
Question type: Mixed practice
Report a problem

The question reference is attached automatically. Please leave out names and contact details.

Voltage and time scales

Multiply vertical divisions by volts per division. Amplitude runs from the zero line to a peak; peak-to-peak spans both extremes. Multiply horizontal divisions for one complete cycle by the time-base. Convert ms to s before using f = 1/T.

Phase difference

For traces of the same frequency, use corresponding rising zero crossings or matching peaks. Phase magnitude = horizontal shift / period span × 360°. The dashed trace B is shifted right and lags A here. A half-cycle shift is 180°; at that limit leading and lagging are equivalent descriptions.

These are ideal sinusoidal signals with a shared sensitivity and time-base. Triggering, probe attenuation, offsets, noise and rms voltage are outside these tasks.

A-level relevance

AQA 7408: 7.1 AT h (selected); AQA 7408: 3.3.1.1 (selected); OCR A H556: 1.2.2(h); 4.4.1(b–c) (selected). Tasks cover the selected skills listed above.

AQA specification · AQA specification · OCR A specification · AQA practical handbook · OCR practical skills handbook

Related practice